TDS-AQUAFIN-IC (IntegraCoat)_071224.pdf
3 Pages
143 KB
Download
<h1>TDS-AQUAFIN-IC (IntegraCoat)_071224.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />f: 410-392-2324 <br />e: info@aquafin.net <br />w: www.aquafin.net</p> <p>Technical Datasheet</p> <p>AQUAFIN®-IC (IntegraCoat) <br />Crystalline Waterproofing Slurry <br />CSI Div. 07 <br />07 16 16 Crystalline Waterproofing</p> <p>Physical and Technical Data <br />Aggregate State:</p> <p>Powder</p> <p>LEED Points</p> <p>Color:</p> <p>Cement gray or white</p> <p>Bulk Density:</p> <p>68 lbs/ft3 (1.09 kg/dm3) gray</p> <p>VOC:</p> <p>(0 g/L)</p> <p>Pot Life:</p> <p>30 minutes</p> <p>Setting Time:</p> <p>~45 mins (gray); ~60 mins (white)</p> <p>Potable water certified <br />(www.wqa.org):</p> <p>NSF/ANSI 61 (gray + white)</p> <p>Permeability <br />(CRD-C 48-92):</p> <p>No measurable leakage up to 460 feet <br />(140 m) head pressure or 200 psi (14 bar), <br />positive or negative water pressure side.</p> <p>MR Credit 5.1, Regional Materials:……..............Up to 2 Points <br />IEQ Credit 4.2, Low-Emitting Materials, Paints and <br />Coatings:...........1 Point. <br />Using this AQUAFIN product can help contribute to LEED certification of projects in the <br />categories shown above.</p> <p>Product Description: <br />AQUAFIN-IC is a state-of the art one component, penetrating cementitious <br />material which waterproofs and protects new or old structurally sound <br />concrete. It resists strong hydrostatic pressure and is not a vapor barrier <br />(allows concrete to “breathe”). <br />AQUAFIN-IC is powered by Aquafin‘s advanced crystalline technology <br />which chemically reacts with moisture and free lime to reduce the water <br />absorption of the resultant cement matrix within the concrete. This is <br />a result of the formation of nano-scale crystals by the active catalysts <br />present in the capillary system. This sustains a durable waterproof effect <br />in the concrete, thereby blocking the passage of water. This reaction will <br />continue to take place anytime water is present for the life of the concrete <br />structure where by making the AQUAFIN-IC a truly permanent and <br />integral waterproofing solution. The AQUAFIN-IC nano-crystals will also <br />grow in and along static hairline crack sealing them and preventing further <br />incoming water. <br />Typical Applications: <br />• Exterior (positive side) or interior (negative side) waterproofing of below <br />grade foundations, basements, retaining walls, utility vaults, elevator pits. <br />• Water tanks, wastewater tanks, water catchment basins, manholes, <br />parking garages, tunnels, slurry walls. <br />Advantages: <br />• Advanced crystalline technology that penetrates deep into concrete <br />• Potable water approved - NSF/ANSI 61 <br />• Applied to moist (damp) substrate <br />• Environmentally friendly, inorganic (sp.)- non toxic, zero VOC’s <br />• Permanently active <br />• Easy to use - needs only water for mixing <br />• Can be applied to green concrete as soon as forms are stripped <br />• Protects concrete against fresh water, salt water, waste water & <br />aggressive ground water <br />• Resists strong hydrostatic pressure <br />• Applied to positive or negative side water pressure <br />• Seals and post seals shrinkage cracks, up to 1/64” (0.4 mm) <br />• Contains no chlorides <br />• Cost effective <br />Crystalline Waterproofing Properties: <br />AQUAFIN-IC contains active waterproofing chemicals which react <br />Check our website for the latest version of the Technical Data Sheet. <br />www.aquafin.net</p> <p>All data are average values obtained under laboratory conditions. In practical use <br />temperature, humidity and absorbance of the substrate may influence the above given <br />values.</p> <p>with moisture and free lime in the concrete, creating insoluble crystalline <br />complexes which seal the capillaries and minor shrinkage cracks. They <br />penetrate even against strong hydrostatic pressure, becoming an integral <br />part of the concrete. The waterproofing chemicals remain active for the <br />life of the structure, permanently sealing it from water penetration. Unlike <br />a membrane, AQUAFIN-IC may require up to one month to reach its <br />maximum waterproofing capability. Environmental factors such as ambient <br />temperature, density of concrete, moisture present and weather conditions <br />all can affect the timing of the sealing process. Under dry conditions the <br />AQUAFIN-IC chemicals lie dormant, however they reactivate whenever <br />re-exposed to moisture. AQUAFIN-IC post seals static shrinkage cracks <br />up to 1/64” (0.4 mm), which occur after the product has been applied <br />and cured. <br />Substrate Preparation: <br />The substrate must be sound, clean, and have an “open” capillary system <br />(“tooth and suction”) (ICRI CSP 3 - 4 profile) to ensure mechanical bond <br />(surface adhesion) and allow AQUAFIN-IC chemicals to penetrate. <br />Horizontal surfaces should have a rough wood float or broom finish. <br />Smooth formed walls, or smooth troweled slabs; must be roughened, <br />roughened, <br />otherwise AQUAFIN-IC application may not achieve sufficient bond. <br />• Remove <br />Remove all dirt, cement laitance, form release agents, curing <br />compounds, loose particles, paints, etc. by means of wet or <br />drysandblasting, high pressure water blasting [i.e. 4,000 psi (275 bar <br />adjusting higher or lower depending on 28 day concrete strength) or <br />other suitable mechanical means. Do not apply to smooth slabs. <br />• Remove <br />Remove all protrusions, work back to sound concrete, chiseling out any <br />honeycombed or damaged areas. Faulty construction joints and visible <br />cracks not subject to movement, exceeding 0.02” (0.4 mm) should be <br />routed out to a U-shaped configuration approx. 3/4” (20 mm) wide and <br />a minimum depth of 1” (25 mm). Form tie holes should be roughened. <br />• Stop <br />Stop all active water leakages using MORTAR-PLUG-IC or Aquafin <br />Page 1 of 2 <br />(07/12/24 VB/AC)</p> <p>AQUAFIN®-IC <br />InjectPro chemical grouts prior to the application of AQUAFIN-IC. <br />Contact Aquafin Technical Department or your local Aquafin <br />Representative for guidance. <br />• Use MEGA-MORTAR-IC for structural repairs. <br />• Use MORTAR-IC for repairing spalls, honey-combed areas, and similar <br />surface repairs. <br />• For <br />For crack treatment, reglets, and coves, use MORTAR-IC. <br />• Thoroughly <br />Thoroughly rinse all the surfaces to be waterproofed with clean water. <br />Prewater several times so that the concrete or masonry is saturated <br />to control surface suction and ensure the growth of the crystalline <br />formation deep within the pores of the substrate. When AQUAFIN-IC is <br />applied, the surface should be damp, but not wet. Any surface water on <br />horizontal surfaces must be removed. <br />Mixing: <br />• Pre-condition <br />Pre-condition material to 70°F (21°C) for 24 hours before mixing. <br />• Approximate <br />Approximate mixing ratio is: <br />• by <br />by volume: 3 parts powder to 1 parts water <br />• 45 <br />45 lb powder to 1.4 - 1.7 gallons water (20.4 kg powder to <br />5.3 - 6.4 liters water) <br />Add the AQUAFIN-IC powder to water and mix thoroughly until the <br />mixture is completely free of lumps. Mix only as much material as can be <br />used within 30 minutes. AQUAFIN-IC should be mechanically mixed with <br />clean water to a consistency of thick oil paint. Separate containers (equal <br />volume), should be used for measuring the powder and water. If "false <br />setting“ occurs after mixing, do not add water; restir to restore workability. <br />Application: <br />Horizontal Surfaces and Construction Joints: <br />A. Dry-sprinkle and power-trowel or wooden float application: <br />A trial dry-shake application is highly recommended prior to the actual <br />application. <br />• Standard <br />Standard application for concrete with design strength up to 4000 psi <br />(27.6 MPa): When the concrete to be treated starts to reach initial set, <br />the specified amount of AQUAFIN-IC is dry distributed, by hand, using <br />a sieve, or similar device, onto the concrete surface. It is then troweled in <br />until coverage is uniform and the specified finish is achieved (smooth or <br />brushed). Consult Technical Guideline G001. <br />B. Mud Slabs / Split Slabs / Construction Joints: <br />• Apply <br />Apply AQUAFIN-IC in slurry or dry powder consistency to prewatered <br />concrete substrate, “mud slab”, split slabs or construction joints <br />immediately prior to casting the structural slab or wall. Consult Technical <br />Guideline G002. <br />C. Brush or spray application: <br />Note: Slab surfaces must have a rough wood float or broom finish. <br />• Apply <br />Apply AQUAFIN-IC in slurry consistency in the specified quantity, in one <br />coat. <br />Vertical Surfaces and Construction Joints: <br />A. Brush application: <br />• Apply <br />Apply two coats of AQUAFIN-IC, in the specified quantity, in a slurry <br />consistency with a masonry brush. Brush on the material evenly and work <br />it well into the surface. Apply second coat while the first coat is still tacky <br />(“green“). <br />B. Spray Application: <br />• AQUAFIN-IC <br />AQUAFIN-IC may be applied using appropriate compressed-air spray <br />equipment. Spray on one or two coats, according to the specification, <br />in circular movements. Apply second coat while first coat is still tacky <br />(“green“).</p> <p>Curing and Protection: <br />Outdoor, or exposed treated areas: <br />• Keep <br />Keep damp (moist) for a period of 2 - 3 days for standard <br />waterproofing applications, 7 days for potable water tanks. Start curing <br />as soon as AQUAFIN-IC has hardened sufficiently so as not to be <br />damaged by a fine water spray. Alternatively a dissipating resin curing <br />agent in elevator pits, wastewater tanks, etc. can be used. Contact <br />Aquafin Technical Department or your local Aquafin Representative for <br />guidance. <br />• Protect <br />Protect exposed surfaces against direct sun, wind and frost by covering <br />with plastic sheeting, burlap, or similar. Do not lay plastic sheeting <br />directly on AQUAFIN-IC as air contact is required for proper curing. <br />• The <br />The freshly treated surfaces should be protected from rain and freezing <br />temperatures for a minimum period of 24 hrs. <br />• Back <br />Back filling can be carried out 36 hrs after completion of the AQUAFINIC treatment. Protection boards are generally not required. Backfill <br />material shall be moist and not contain rocks or larger aggregate. <br />Indoor treated areas: <br />• Self <br />Self curing in cool areas with high humidity. <br />• Keep <br />Keep moist for 2 - 3 days in areas with low humidity and 7 days for <br />potable water tanks. <br />• Provide <br />Provide air circulation for minimum 24 hrs. following the AQUAFIN-IC <br />treatment in poorly ventilated areas and deep pits. <br />Water Tanks: <br />• Can <br />Can be carefully filled after 3 days. Do not fill large tanks faster than <br />6½ feet per 24 hrs (2 m/24 hrs). <br />• After <br />After complete curing of AQUAFIN-IC, potable water reservoirs should\ <br />be thoroughly rinsed with potable water prior to being placed in service. <br />Clean-up: <br />Clean tools and equipment with water immediately after use. Cured <br />material can only be removed mechanically. <br />Decoration, Coating and Tiling <br />• All <br />All surfaces treated with AQUAFIN-IC which are to be coated or <br />painted must be left to cure for at least 4 weeks. At the end of the curing <br />period, the surfaces should be saturated with water and neutralized <br />with a 1:8 solution of muriatic acid. Following this, the areas must be <br />thoroughly rinsed with water. <br />• When <br />When a plaster or render finish is required on top of AQUAFIN-IC <br />treatments, it is essential to apply a thin rough cast of sand and cement <br />on the final AQUAFIN-IC layer when it has reached initial set. If this is <br />not practical, carefully clean the hardened AQUAFIN-IC surface and <br />apply an appropriate bonding agent prior to rendering. <br />• Do <br />Do not use for waterproofing applications under thin set tile mortar (i.e. <br />swimming pools, balconies, etc.). <br />• Slabs <br />Slabs on or below grade to be covered with vinyl tiles or other <br />nonbreathable products (i.e. epoxy, some carpets, resilient flooring, etc.) <br />must be checked for moisture vapor emission as per ASTM F 1869-98 <br />before installation of tiles, etc. since AQUAFIN-IC is not a vapor barrier. <br />If vapor emission is an issue, contact Aqaufin Technical Department or <br />your local Aquafin Representative for information about VAPORTIGHT <br />COAT-SG2 and VAPORTIGHT COAT--SG3 products. <br />Limitations: <br />• Do <br />Do not apply AQUAFIN-IC at temperatures below 40° F (5°C) or to a <br />frozen substrate. <br />• For <br />For temperatures of 90°F (32°C) and above consult Aquafin Technical <br />Department or your local Aquafin Representative for guidance. <br />• Do <br />Do not apply to a dry substrate. <br />• Do not use AQUAFIN-IC for masonry substrates (brick, stone, CMU</p> <p>Check our website for the latest version of the Technical Data Sheet. Only the current version is legally binding and only for the intended market. In cases of uncertainty contact <br />our technical department for further information before starting any applications. <br />Page 2 of 3 <br />www.aquafin.net <br />(07/12/24 VB/AC)</p> <p>AQUAFIN®-IC <br />etc.). Ask your local Aquafin Representative about AQUAFIN-1K and <br />AQUAFIN-2K/M products. <br />• Do not retemper (do not add additional water to the mix once <br />AQUAFIN-IC begins to set/thicken). <br />Packaging: <br />45 lb. (20.4 kg) bags or pails. <br />Storage & Shelf Life: <br />AQUAFIN-IC must be stored in a dry enclosed area off the ground. Shelf <br />life in unopened, dry undamaged bags or pails is 12 months. <br />Note: <br />Proper application is the sole responsibility of the user. Applicators are <br />expected to follow ICRI and ACI guidelines as well as other applicable <br />industry standards. Aquafin personnel or representatives are not site <br />inspectors or construction project managers and therefore do not approve <br />surface preparation, mixing, or application of Aquafin products. Site visits <br />by Aquafin personnel or representatives are solely for the purpose of <br />making technical recommendations, not for providing supervision or quality <br />control.</p> <p>LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year <br />from the date of installation to be manufactured free of defects and to be consistent <br />with its technical properties as stated in our current Technical Data Sheet. This product <br />must be used as directed and within its stated shelf life. AQUAFIN INC. will replace <br />or at our discretion refund the purchase price of any product, excluding cost of labor, <br />which is proven to be defective. Our product recommendations are based on industry <br />standards and testing procedures. It is the buyer’s obligation to test the suitability of <br />the product for an intended use prior to using it. We assume no warranties written, <br />expressed, or implied as to any specific methods of application or use of the product. <br />We do not guarantee compatibility of Aquafin products with other brands. For this <br />reason, we strongly recommend application of a sample area at the jobsite to help <br />determine suitability with other products. AQUAFIN INC. MAKES NO WARRANTY <br />AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND <br />THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. <br />AQUAFIN, INC. shall not be liable for damages of any sort including remote or <br />consequential damages, down time, or delay. Any claim for a defective product must <br />be filed within 30 days of discovery of a problem and must be submitted with written <br />proof of purchase.</p> <p>For Professional Use Only.</p> <p>General Information: <br />All details in particular to the suggestions for the processing and use of the <br />product is based on our present knowledge and experiences at the time of <br />printing. Depending on specific applications, in particular regarding <br />substrates, processing and environmental conditions may affect final results.</p> <p>Certified to</p> <p>NSF/ANSI Standard 61 <br />see www.wqa.org for use restrictions</p> <p>Safety: <br />Refer to Safety Data Sheet (SDS). The use of a dust mask, safety goggles <br />and gloves is recommended. This document does not purport to <br />address all of the safety concerns, if any, associated with its use. It is the <br />responsibility of the user of this document to establish appropriate safety <br />and health practices and to determine the applicability of regulatory <br />limitations prior to use. Dispose of water and materials in accordance with <br />Federal, State and Local regulations. <br />Keep out of the reach of children.</p> <p>Application Rate, Consumption & Yield <br />Structure:</p> <p>AQUAFIN-IC (IntegraCoat) (Gray or White) <br />No. of <br />coats</p> <p>Rate/Coat <br />lb/yd2 (kg/m2)</p> <p>Yield/Coat <br />ft2 /45 lb. (m2/20.4 kg)</p> <p>Dampproofing: <br />Normal surface applications:</p> <p>1</p> <p>1.40</p> <p>(0.75)</p> <p>288</p> <p>(27.3)</p> <p>2 <br />total</p> <p>1.25 - 1.4 <br />2.50 - 2.8</p> <p>Concrete slabs:</p> <p>1</p> <p>2.00</p> <p>(1.00)</p> <p>203</p> <p>(20.4)</p> <p>Top of mud slabs + split slabs:</p> <p>1</p> <p>2.25</p> <p>(1.20)</p> <p>180</p> <p>(17.0)</p> <p>Construction joints:</p> <p>1</p> <p>2.00</p> <p>(1.00)</p> <p>203</p> <p>(20.4)</p> <p>Hydrostatic pressure: <br />Walls, internal / external:</p> <p>(0.75) <br />(1.50)</p> <p>288 - 324 <br />144 - 162</p> <p>(27.3) <br />(13.6)</p> <p>Note: For salt & waste water environments, apply 2.8 lb/y2 (1.5 kg/m2) total. All above values theoretical. Coating thickness, approximately 1/32” (0.8 mm).</p> <p>Check our website for the latest version of the Technical Data Sheet. Only the current version is legally binding and only for the intended market. In cases of uncertainty contact <br />our technical department for further information before starting any applications. <br />Page 3 of 3 <br />www.aquafin.net <br />(07/12/24 VB/AC)</p>
