9 Aquafin Sealing Gasket_042518.pdf
1 Page
245 KB
Download
<h1>9 Aquafin Sealing Gasket_042518.pdf</h1> <p>AQUAFIN Inc. <br />505 Blue Ball Rd. #160 <br />Elkton, MD 21921 <br />p: 410-392-2300 <br />f: 410-392-2324 <br />e: info@aquafin.net <br />w: www.aquafin.net</p> <p>Sealing Gasket-18/18 <br />Technical Datasheet <br />Sealing Technical <br />Gasket-18/18 <br />Data</p> <p>August <br />20092009 <br />August</p> <p>AQUAFIN, <br />Inc.Inc. <br />AQUAFIN,</p> <p>Installation <br />Elastomeric Pipe <br />1. <br />Place sealing gasket over pipe or floor <br />Installation <br />Product: <br />SEALING GASKET-18/18 <br />Technical Data <br />Sealing <br />Gasket-18/18 <br />Elastomeric <br />Pipe <br />drain and mark size of penetration, then <br />1. <br />Place <br />sealing <br />gasket <br />over <br />pipe <br />or <br />floor <br />Product: <br />SEALING <br />GASKET-18/18 <br />Material: <br />elastomeric <br />membrane <br />Penetration <br />Sealing Sealing Gasket <br />cut out necessary opening (penetration). <br />Elastomeric <br />Pipe Penetration <br />drain and mark size of penetration, then <br />embedded <br />in <br />backing fabric <br />(See <br />picture <br />below.) <br />Material: <br />elastomeric membrane <br />Penetration <br />Sealing <br />cut out necessary opening (penetration). <br />Gasket <br />Applypicture <br />one below.) <br />prime coat of AQUAFIN2. (See <br />embedded <br />in backing fabric <br />Color: <br />white <br />2K/M over concrete and exposed PVC <br />CSI Div. 07 <br />Physical <br />and Technical <br />Data <br />Gasket <br />of AQUAFIN2. Apply one prime coat <br />Color: <br />white <br />Thickness: <br />approx. 1/64" (0.35 mm) <br />pipe or drain lid, extending minimum <br />07 16 0 Accessory For Acrylic Modified Cement Waterproofing <br />2K/M over concrete and exposed PVC</p> <p>† Waterproof and "breathable" <br />3/4" (20 mm) beyond <br />eitherElastomeric <br />side of membrane <br />Material: <br />embedded <br />fabric <br />Thickness: <br />approx. <br />1/64" <br />(0.35 <br />mm) <br />Elongation: <br />60% in backing <br />(ASTM <br />D-638) <br />pipe or drain lid, extending minimum <br />gasket. <br />† <br />Waterproof <br />and <br />"breathable" <br />† <br />Elongation <br />>60% <br />3/4" (20 mm) beyond <br />either side of <br />Product Description: <br />Color: <br />White <br />Elongation: <br />(ASTM <br />D-638) <br />Tear strength: 60% <br />ASTM D-2240 <br />725 psi (5.0 <br />MPa) <br />3. gasket. <br />While this prime coat is still wet, place <br />AQUAFIN’s <br />SEALING <br />GASKET-18/18 is an elastomeric, <br />tear resistant, <br />† Product <br />Elongation <br />>60% <br />Description <br />and firmly press, by using <br />a steel trowel <br />Thickness: <br />approx. 1/64” <br />(0.35o mm) <br />o</p> <p>Check our website for the latest version of the Technical Data Sheet. <br />DISTRIBUTED BY: <br />AQUAFIN, Inc. <br />www.aquafin.net</p> <p>505 Blue Ball Inc. <br />Rd., #160 <br />AQUAFIN, <br />Phone <br />(410) <br />392 <br />2300 <br />505 Blue Ball Rd., -#160</p> <p>Elkton, MD 21921 <br />FaxElkton, <br />(410) 392 <br />- 2324 <br />MD 21921</p> <p>DISTRIBUTED BY:</p> <p>Page 1 of 1 <br />E-mail: info@aquafin.net <br />(04/25/18 EK) <br />http://www.aquafin.net <br />E-mail: info@aquafin.net <br />Check website for latest updates <br />http://www.aquafin.net</p> <p>03 03 <br />15 15 <br />13 13WATERSTOPS <br />WATERSTOPS</p> <p>Chlorofluorcarbons <br />++ Hydraulic <br />Heating oiloil <br />++ Sea <br />Shock <br />absorber oil <br />++ <br />Ammonia <br />10% <br />++ <br />++ <br />water <br />++ <br />• Highly <br />resistant against oil, grease <br />and <br />solvents <br />Inexpensive permanent solution for joint <br />xAdvantages <br />Cyclohexanone <br />++ <br />Isopropanol <br />+ <br />Sodium <br />chloride <br />solution <br />++ <br />Installation: <br />Chlorofluorcarbons <br />++ <br />Heating <br />oil <br />++ <br />• Good <br />weathering <br />resistance++ Shock absorber oil <br />sealing problems <br />Dibutylphtalate <br />++ Isopropanol <br />Isooctane <br />++ <br />Styrene chloride solution <br />+ <br />Inexpensive <br />permanent <br />solution <br />for drain <br />joint and mark <br />1.x Place <br />sealing gasket <br />over pipe <br />or floor <br />size of <br />Cyclohexanone <br />++ <br />+ <br />Sodium <br />++ <br />• Excellent <br />decomposition resistance <br />(microbes) <br />Quick and <br />easy installation <br />xpenetration, <br />Diesel <br />fuel <br />++ <br />Kerosene <br />++ <br />Tetrachloroethylene <br />+ <br />sealing <br />problems <br />then cut out necessary opening (penetration). <br />(See below.) <br />Dibutylphtalate <br />++ <br />Isooctane <br />++ Styrene <br />+ <br />• Good <br />UV resistance <br />Enginefuel <br />oil <br />++ <br />Linseed <br />oil <br />++ Tetrachloroethylene <br />Thistle oil <br />++ <br />andprime <br />easy <br />installation <br />xxAQuick <br />Waterproof <br />- coat <br />resistant <br />to hydrostatic <br />2. <br />pply <br />one <br />of AQUAFIN2K/M <br />over concrete <br />and exposed <br />Diesel <br />++ <br />Kerosene <br />++ <br />+ <br />All dataLubricant <br />are averages of several tests under <br />conditions. In practice, climatic+ <br />Ethyl ether <br />++ <br />++laboratory <br />Toluene <br />pressure <br />++ <br />Linseed oil(grease) <br />++ <br />Thistle <br />oil <br />++ <br />pipe or drain <br />lid, extending <br />minimum 3/4” (20Engine <br />mm) oil <br />beyond either <br />Waterproof <br />- resistant <br />to hydrostatic <br />x PVC <br />variations <br />such as temperature and humidity <br />affect these <br />values. <br />Glycolether <br />++ <br />Methanol <br />+ mayToluene <br />Water, <br />distilled <br />++ <br />Permanently <br />flexible <br />xside <br />Ethyl <br />++ <br />Lubricant <br />(grease) <br />++ <br />+ <br />of gasket. <br />pressure <br />Glycerol <br />++ <br />Petroleum <br />ether <br />++ <br />Water, <br />potable <br />++ <br />Glycol <br />++ <br />Methanol <br />+ <br />Water, <br />distilled <br />++ <br />Packaging <br />& <br />Storage: <br />3. <br />W</p> <p>hile <br />this <br />prime <br />coat <br />is <br />still <br />wet, <br />place <br />and <br />firmly <br />press, <br />by <br />using <br />a <br />steel <br />flexiblewith flexible cementixx Permanently <br />Attached/installed <br />Gasoline regular <br />++ Petroleum <br />Phenol ether <br />+ <br />Water, potable <br />seawater <br />++ <br />++ <br />++ <br />++ <br />25 sealing <br />gaskets per box. Store <br />in aWater, <br />dry enclosed area off the ground. <br />trowel <br />similar, SEALING <br />GASKET-18/18 into theGlycerol <br />AQUAFIN-2K/M, <br />tious or <br />AQUAFIN-2K/M <br />waterproofing <br />Gasoline <br />premium <br />+ <br />Potash <br />lye, <br />10% <br />+ <br />Attached/installed <br />with <br />flexible <br />cementix leaving no wrinkles. <br />Gasoline regular <br />++ Phenol <br />+ <br />Water, seawater <br />++ <br />Breathable, <br />not a vapor <br />barrier - allows <br />x tious <br />AQUAFIN-2K/M <br />waterproofing <br />Gasoline <br />premium (no or only minor <br />+ change <br />Potashoflye, <br />10%and size) <br />+ <br />++ = resistant <br />weight <br />Note: <br />4. Cfast <br />over drying <br />SEALING <br />2nd coat AQUAFIN-2K/M <br />of GASKET-18/18 <br />water based tilewith <br />mortars <br />not a vapor barrier - allows <br />x Breathable, <br />+ = medium to short termInstaller <br />resistance <br />(change of weight <br />and size)product application. Site visits by Aquafin <br />and waterproofing <br />materials <br />is responsible <br />proper <br />(same <br />or next of <br />day) <br />and <br />smooth <br />++ =brush. <br />resistant (no or only minor change <br />of weight andforsize) <br />fast drying <br />water <br />based the <br />tile surface <br />mortarswith a damp <br />personnel <br />or <br />representatives <br />solely for the purpose of making technical <br />+ = medium to short term resistance (change of weight andare <br />size) <br />and waterproofing materials <br />recommendations, not for providing supervision or quality control.</p> <p>DIV. <br />DIV.0303++0707 07 07 <br />16 16 <br />13 13POLYMER <br />MODIFIED <br />CEMENT <br />WATERPROOFING <br />POLYMER <br />MODIFIED <br />CEMENT <br />WATERPROOFING</p> <p>Tear <br />strength: 725 <br />MPa) <br />3. While <br />prime coat is still wet, place <br />-4 Fpsito(5.0 <br />+194 <br />F ASTM D-2240 <br />Temperature <br />breathable waterproofing gasket which prevents the passage <br />of this <br />moisture <br />or similar, <br />SEALING GASKET-18/18 into <br />o <br />o <br />Product <br />Description <br />Aquafin <br />GASKET-18/18is bonded <br />is an to the substrate <br />and firmly <br />a steel trowelD-638resistance:60% (-20 <br />o C to +90 o C) <br />Elongation: <br />and <br />water. SEALING <br />SEALING <br />GASKET-18/18 <br />withpress, by using <br />the AQUAFIN-2K/M, <br />leaving noASTM <br />wrink-4 <br />F <br />to <br />+194 <br />F <br />Temperature <br />elastomeric, tear resistant, breathable watersimilar, SEALING GASKET-18/18 into <br />o <br />les. <br />AQUAFIN-2K/M <br />flexible <br />cementitious waterproofing <br />andor <br />can <br />be applied <br />Aquafin SEALING <br />GASKET-18/18 <br />is an <br />resistance: <br />(-20(5.0 <br />C toMPa) <br />+90 oC) <br />Strength: <br />ASTM D-2240 <br />725 psi <br />Alkali resistance: <br />proofing gasket which prevents the passage <br />the AQUAFIN-2K/M, Tear <br />leaving <br />no wrinkelastomeric, <br />tear <br />resistant, <br />breathable <br />waterto <br />all <br />substrates <br />that <br />can <br />be <br />treated <br />with <br />AQUAFIN-2K/M <br />cementitious <br />4. <br />Cover <br />SEALING <br />GASKET-18/18 <br />with <br />of moisture and water. <br />les. <br />y Resistant <br />against <br />boiling (-20°C <br />in Sodium <br />Hydroxide <br />Alkali <br />resistance: <br />Temperature <br />resistance: <br />-4°F <br />to +194°F <br />to +90°C) <br />proofing gasket <br />which to <br />prevents <br />2nd <br />coat with <br />AQUAFIN-2K/M <br />(same or <br />next <br />waterproofing, <br />exposed <br />positive the <br />sidepassage <br />water pressure, <br />covered <br />with <br />pH <br />12 <br />4. orCover <br />SEALING GASKET-18/18 with <br />SEALING <br />is bonded to the <br />of <br />moisture GASKET-18/18 <br />and water. <br />y Resistant against boiling in Sodium Hydroxide <br />day) and smooth the <br />surface Resistance: <br />with a <br />Chemical <br />ceramic <br />tiles. with AQUAFIN-2K/M flexible <br />2nd coat AQUAFIN-2K/M <br />(same or next <br />substrate <br />y with <br />Resistant <br />against boiling in 2% Potassium <br />damp brush. <br />pH 12of <br />SEALING GASKET-18/18 is bonded to the <br />Resistant <br />(no <br />or <br />only <br />minor <br />change <br />weight and <br />size): Ammonia <br />day) <br />and <br />smooth <br />the <br />surface <br />with <br />a <br />cementitious waterproofing. <br />Hydroxide <br />(minimum <br />10 minutes) <br />substrate with AQUAFIN-2K/M flexible <br />y <br />Resistant <br />against <br />boiling <br />in 2% Potassium <br />damp brush. <br />10%, <br />Chlorofluorcarbons, <br />Cyclohexanone, <br />Dibutylphtalate, <br />fuel, <br />Typical Applications: <br />y Hydroxide <br />Resistant (minimum <br />when stored <br />in CalciumDiesel <br />Hydroxide <br />Packaging <br />cementitious <br />waterproofing. <br />10 <br />minutes) <br />Typical <br />Applications <br />Engine oil, Ethyl ether, Glycol, <br />Glycerol, <br />Gasoline <br />regular, <br />Hydraulic <br />Installed on horizontal and vertical surfaces for sealing of PVC and other <br />with pH 12when stored in Calcium Hydroxide <br />y Resistant <br />25Packaging <br />sealing gaskets per box. <br />Smaller oil, <br />quantixTypical <br />oil, Heating <br />Isooctane, <br />Kerosene, Linseed oil, Lubricant (grease), <br />pipe <br />penetrations, <br />floor drains, <br />skimmers, <br />Installed <br />on horizontal <br />and <br />vertical etc. <br />surfaApplications <br />with <br />pH 12 <br />Other <br />resistances: <br />tiessealing <br />available <br />upon request. <br />ces. <br />Petroleum <br />ether, <br />Sea <br />water, <br />Shock <br />absorber oil, Sodium chloride <br />25 <br />gaskets <br />per <br />box. <br />Smaller <br />quantix Installed on horizontal and vertical surfay <br />Highly <br />resistant <br />against oil, grease and <br />x <br />Sealing of PVC and other pipe penetra(distilled, <br />potable, seawater) <br />Advantages: <br />Other <br />resistances: <br />ties available upon request.solution, Thistle oil, Water <br />ces. <br />solvents <br />tions, <br />floor <br />drains, <br />skimmers, <br />etc. <br />Medium <br />to <br />short <br />term <br />resistance <br />(change <br />of <br />weight and <br />• Inexpensive <br />for joint <br />sealing problems <br />y Highly resistant against <br />oil, size): <br />grease and <br />x <br />Sealing of permanent <br />PVC and solution <br />other pipe <br />penetrax Qtions, <br />y solvents <br />GoodPhenol, <br />weathering <br />resistance <br />Applied <br />allinstallation <br />substrates <br />Gasoline premium, Methanol, <br />Potash <br />lye (10%) Styrene, <br />• <br />uick and <br />easy <br />floorto <br />drains, <br />skimmers, that <br />etc. can be <br />treated <br />with <br />AQUAFIN-2K/M <br />cementitious <br />Excellent <br />decomposition <br />resistance (microbes) <br />Tetrachloroetheylene, Toluene <br />• W <br />aterproof <br />to hydrostatic <br />x <br />yy Good <br />weathering <br />resistance <br />Applied <br />to- resistant <br />all substrates <br />that pressure <br />can be <br />waterproofing, exposed to positive side <br />y <br />good <br />UV <br />resistance <br />Alkali resistance against: <br />Sodium Hydroxide <br />with resistance <br />pH 12, boiling <br />in 2% <br />• Ptreated <br />ermanently <br />withflexible <br />AQUAFIN-2K/M cementitious <br />y Excellent <br />decomposition <br />(microbes) <br />water pressure, or covered with ceramic <br />to positive side <br />Potassium Hydroxide (min. <br />10 minutes), <br />stored in Calcium Hydroxide <br />• Awaterproofing, <br />ttached/installedexposed <br />with AQUAFIN-2K/M <br />waterproofing <br />y <br />good <br />UV <br />resistance <br />tiles. <br />CHEMICAL RESISTANCE <br />OF SEALING GASKET-18/18 <br />pressure, <br />or covered <br />ceramic <br />with pH 12 <br />• Bwater <br />reathable, <br />not a vapor <br />barrier with <br />- allows <br />fast drying of water based tile <br />tiles. <br />CHEMICAL <br />RESISTANCE <br />OF <br />SEALING <br />mortars and waterproofing materials <br />Ammonia 10% <br />++ <br />oil GASKET-18/18 <br />++ Sea water <br />++ <br />Advantages <br />Other Hydraulic <br />resistances:</p>
